HP OJPRO 8600 Driver Install

    HP OJPRO 8600 Driver Installation

    Downloading the hp officejet pro 8600 printer softwares and HP OJPRO 8600 driver in your system will allow you to print from your computer. The HP printer provides separate drivers and softwares for each specific printer model. You can download and install the specific drivers and softwares for your 123 hp officejet pro 8600 printer in your computer easily by following simple steps. For this you must simply enter your printer model in the search bar of your computer. Choose the driver and softwares for your computer OS version. To install the drivers and softwares in your computer, follow the steps below:

    • Switch on your 123 hp officejet pro 8600 printer by connecting the power cord provided.
    • Connect the printer to the System with the USB cable provided, which is not more than 3 metres length to connect with the network properly.
    • If the OS is Windows 10, then the built in software will automatically detect the OS.
    • The built in software will start downloading the driver software into your system.
    • Follow the instructions that appears in the screen to complete the installation process.
    • For further assistance, 123.hp.com/setup.
    • If it is some other Windows OS follow the steps below.

    Officejet pro Driver Install for Windows:

    HP OJPRO 8600 Driver

    • Power on the 123 hp officejet pro 8600 Printer by connecting it to the power cord provided.
    • Insert the CD/DVD ROM provided in the system.
    • Connect the USB Cable to the Printer.
    • You will get a prompt message to connect it to the System.
    • Connect the cable to the system and place the printer close to the system, so that the network connection would be proper.
    • The system detects the Printer.
    • If your system didn’t detect then unplug the USB cable.
    • Connect it again properly.
    • If again not detected, try a different USB slot.
    • At once the printer is detected by the system, the Auto run window will open.
    • Double click on the Setup File.
    • Start the Installation wizard.
    • After installation, your system is ready to print any document with the help of the printer connected to it.
    • To check it, take a test print.

    HP OJPRO 8600 Scan Setup

    When the scanner did nothing

    1. Ensure that the original document is loaded properly.
    2. If your Sleep mode is just wearing, then it might take time for the printer to start its job.
    3. Ensure that the HP software you have installed is proper. If not, uninstall the software and visit our site to download the latest software and drivers.

    When the scan takes too long

    If you have set the printer to scan in high resolution, it is entitled to take longer and the result will be a larger file size. The lower the resolution, the lesser the time taken to scan.

    When part of the document did not scan or text is missing

    1. Make sure that the original document is loaded properly. Also, if you have scanned your document from the automatic document feeder, try scanning it for the scanner glass.
    2. Also, keep in mind that colour backgrounds might cause the foreground and background images to blend. So, adjust the scan settings before the scan job begins.
    3. Check if the input paper size is large enough to occupy the original that is being scanned.
    4. Sometimes, the printer is automatically set to perform a specific task. Check the setting and change according to your need.

    When text cannot be edited

    1. Check if OCR has been installed in your HP Officejet Pro printer.
    2. Perform one of the following tasks based on the operating system you use.
      1. Windows 8: Start – – > app bar – – > All apps – – > Printer name – – > Utilities – – > Printer Setup & Software – – > Add more software – – > Customize Software Selection – – > OCR.
      2. Windows 7, Windows Vista and Windows XP: Start – – > All Programs – – > HP – – > printer name – – > Printer Setup & Software – -> Add more software – – > Customize Software Selection – – > OCR.
      3. If you have installed the HP software on your Macintosh, then the OCR software might not be installed. To install it, insert the software CD that came with your printer, and click on the HP installer icon on the printer software.
    3. The document type you have selection should be editable text. It is is classified as graphic, it cannot be converted to text.
    4. Check where the original document is placed. When the document is scanned as an editable text from ADF, the original must placed in the automatic document feeder. If the document is scanned from the scanner glass, then the original must placed on the scanner glass print side down.
    5. The original document should have good image quality.
    6. It is to be noted that colored backgrounds can cause distortion in the scanned image.