HP OJPRO 7740 Ink Cartridges Installation

    HP OJPRO 7740 Ink Cartridges
    HP Officejet pro 6968 printer uses the HP Original ink cartridges. This 123 hp officejet pro 6968 printer consists of four coloured separate ink cartridges. The colours includes the black, cyan, yellow and magenta. As these ink cartridges are separate, it adds more value to the hp officejet pro 6968 printer. If any of your ink cartridges runs out of ink, you can replace only the colour that ran out of ink. By this you can save more money.

    Also, these ink cartridges are covered with the cartridge cap for additional protection. HP printers offers the HP Original ink cartridges specifically to suit your hp printer model. HP usually recommends to use the Original ink cartridges as it has been tested several times before it reaches your hands, to give you best quality prints. These HP Original ink cartridges are quality assured and can give you fadeless and smudge free prints.

    HP OJPRO 7740 Ink

    These HP Original ink cartridges are eco-friendly, which can be recycled easily at once you finished using. These HP Original ink cartridges can give you more prints than the ordinary cartridges. Also, this HP Officejet pro 6968 printer supports the HP instant ink facility that makes your hp officejet pro 6968 printer never to run out of ink. Every time your hp officejet pro 6968 printer needs ink, this hp instant ink supply will be at your doorsteps. To install the ink cartridges in the hp officejet pro 6968 printer, HP OJPro 7740 Ink instruction follow the steps below:

    Unbox your 123 hp officejet pro 6968 printer and remove all the packing materials.
    Connect the power cord to the printer and to an electrical outlet.
    Lift the scanner upwards.
    You will find the cartridge holders inside the cartridge access door.
    Now, open the cartridges from the packaging and remove the orange tape from all the four coloured ink cartridges.
    Twist the orange caps in thee cartridges and remove it.
    Install the ink cartridges in the holders according to the colours specified.
    Close the cartridge access door and allow the 123 hp officejet pro 6968 printer to install ink.
    Your 123 hp officejet pro 6968 printer is ready to use.

    HP OJPRO 7740 Scan Setup

    When the scanner did nothing

    1. Ensure that the original document is loaded properly.
    2. If your Sleep mode is just wearing, then it might take time for the printer to start its job.
    3. Ensure that the HP software you have installed is proper. If not, uninstall the software and visit our site to download the latest software and drivers.

    When the scan takes too long

    If you have set the printer to scan in high resolution, it is entitled to take longer and the result will be a larger file size. The lower the resolution, the lesser the time taken to scan.

    When part of the document did not scan or text is missing

    1. Make sure that the original document is loaded properly. Also, if you have scanned your document from the automatic document feeder, try scanning it for the scanner glass.
    2. Also, keep in mind that colour backgrounds might cause the foreground and background images to blend. So, adjust the scan settings before the scan job begins.
    3. Check if the input paper size is large enough to occupy the original that is being scanned.
    4. Sometimes, the printer is automatically set to perform a specific task. Check the setting and change according to your need.

    When text cannot be edited

    1. Check if OCR has been installed in your HP Officejet Pro printer.
    2. Perform one of the following tasks based on the operating system you use.
      1. Windows 8: Start – – > app bar – – > All apps – – > Printer name – – > Utilities – – > Printer Setup & Software – – > Add more software – – > Customize Software Selection – – > OCR.
      2. Windows 7, Windows Vista and Windows XP: Start – – > All Programs – – > HP – – > printer name – – > Printer Setup & Software – -> Add more software – – > Customize Software Selection – – > OCR.
      3. If you have installed the HP software on your Macintosh, then the OCR software might not be installed. To install it, insert the software CD that came with your printer, and click on the HP installer icon on the printer software.
    3. The document type you have selection should be editable text. It is is classified as graphic, it cannot be converted to text.
    4. Check where the original document is placed. When the document is scanned as an editable text from ADF, the original must placed in the automatic document feeder. If the document is scanned from the scanner glass, then the original must placed on the scanner glass print side down.
    5. The original document should have good image quality.
    6. It is to be noted that colored backgrounds can cause distortion in the scanned image.