HP Envy 4520 Ink Cartridges Installation

    HP Envy 4520 usually suits with the Original HP ink cartridges, which is specifically made to suit each HP printer model. When you replace your HP Envy 4520 ink cartridges, make sure that the ink cartridges are HP Original ink cartridges for HP Envy 4520 printer. HP usually recommends to use the Original ink cartridges as these are tested several times before it reaches your hands, to give you best quality prints. These HP Original ink cartridges are quality assured and can give you fadeless and smudge free prints.

    These HP Original ink cartridges are eco-friendly and can be recycled easily at once you finished using. These HP Original ink cartridges can give you more prints than the ordinary cartridges. In HP Envy 4520 printer, you have a black colour ink cartridge and a tricolour ink cartridge. At once any of your ink cartridges runs out of ink, you can replace it immediately. As the coloured ink cartridges are made one as a tri colour ink cartridge, it avoids the unnecessary doubts. Always use Original HP ink cartridges for better performance. Ink cartridges installation is very simple in this HP Envy 4520 printer as follows,

    HP Envy 4520 Ink

    • Take away your 123 hp envy 4520 printer from the packaging.
    • Also, take away the materials provided along with the printer such as the ink cartridges, power cord, user guide, etc.
    • Remove the packing materials from the outside of the printer.
    • Then, remove the tapes and cardboard pieces from the input tray, scanner glass, output tray and near the cartridge holder.
    • Connect the power cord to the rear of the 123 hp envy 4520 printer and to the electrical outlet.
    • Power on your printer using the power button in the printer’s control panel.
    • Allow the printer to get started.
    • Lift the scanner upwards and make it fix in its position.
    • You will find a cartridge holder at once you lifted the scanner.
    • Now, open the cartridge cover in the holder.
    • Unpack the cartridges and make sure that you don’t shake the cartridges, as it may cause damage to the cartridges.
    • Then, remove the orange coloured tapes from the cartridges. While removing, please don’t touch the electrical contacts or the ink nozzles.
    • Insert the cartridges in the holders according to the colours specified in the cartridge covers, facing the coloured side upwards.
    • Close the cartridge cover and now lower the scanner.
    • Your 123 hp envy 4520 printer will start installing the cartridges if you have inserted properly.
    • The all new 123.hp.com/envy4520 printer is ready to use.

    HP Envy 4520 Scan Setup

    When scanned image quality is poor

    1. If the original paper is too thin or transparent, then there are chances that the text or image can bleed on to the other side.
    2. If you see unwanted lines on the scanned document, clean the scanner glass and look for ink, glue, unwanted substance and correction fluid.
    3. If the scanned image is crooked, check if the original is loaded properly.
    4. If the scanned image shows blots, lines, white vertical stripes or unwanted lines, then the scanner glass is dirty. Clean the scanner glass. If you still encounter the problem, then the original document may have defects.
    5. If the image size is reduced, then the printer software settings may be set to reduce the quality.

    When you are unable to scan to network folder

    1. Ensure that the computer where the network folder is stored is switched on and connected to the network.
    2. The folder you have created should be on the server.
    3. The users should be able to read and write the contents of the folder. If you are using an Apple desktop, SMB sharing should be enabled.
    4. The folder name should use only letters or characters that are supported by the operating system.
    5. The folder name should be in the correct format.
    6. Valid username and password should be entered.
    7. The server in which the folder has been created should have free disk space.
    8. If you have scanned many files to a particular folder, you can change the prefix. The printer can create to 9,999 files using the same name with different prefix and suffix.